Tin multi function series of anti-theft alarm control host

Product type: YL-007M3GX

Function introduction:

High speed digital communication mode, /4+2, CID compatible night digital communication protocol; submit the information to the alarm center.

With eight output module, you can customize the output mode: output linkage; remote control output (mainly used in monitoring, control home appliances, lamps, see 4.39)

Can be a variety of programmed for the system, such as the alarm mode, zone type, recording, monitoring, remote control, alarm telephone number, telephone line detection.

Wired, wireless and compatible.

Install the master password. Password, the 1 groups of 6 digits to modify, 15 groups of sub password can be set according to the need, improve safety.

Can be set 6 alarm telephone number (fixed telephone or mobile phone number) and 3 groups of alarm center telephone number. The alarm is triggered, circular dial.

9 kinds of protection means: leave protection, perimeter, delay protection, distance protection, single Defenee zone protection, mandatory protection, timing recovery, remote control arm remote partition protection (to build).

7 Chefang: stand alone Chefang, password keyboard, remote alarm, alarm disarm disarm, timing disarming, remote control, remote alarm Chefang partition (to build).

8 defense areas: immediate area, delay, area 24 hour standoff, perimeter defense area, fire area, gas area, check area, bypassed zones.

When the alarm, monitor the scene, driving the alarm rang.

The built-in recording module, recordable 10-20 seconds voice, voice prompt alarm.

Customizable alarm time delay and whistling.

Store 50 event record, query alarm and cloth removal information.

Protection, alarm, emergency operation by remote control.

Available host keyboard shortcut key operation, simple and convenient.

A telephone line fault detection function, such as the telephone line is cut or short circuit, the system will send the alarm.

A telephone line to line function, ensure the alarm dialer priority.

The host has a charging circuit, but the built-in DC12V sealed lead-acid battery, power without stopping.

With the "watchdog" function, prevent crashes.

Technical parameters

Host

Power supply: AC220V+10%

Static current consumption: ≤ 100mA

Power: ≤ 1.5W

Alarm output: ≤ 650mA, 12V

Output voltage: DC12V to 15V

The wireless receiving frequency: 315MHZ (433MHZ order)

Environment temperature: -10 ~ 55 ° C

Humidity: 40 ~ 70%

Weight: 2.5kg

An iron case size: 255mm x 235mm x 70mm

Keyboard size: 159mm x 138mm x 33mm

Wireless magnetometer

Power supply: DC12V (built-in 12V battery)

Static current: ≤ 20 μ

The emission current: ≤ 15mA

Frequency: 315 MHz ± 0.5 MHz

Transmission distance: barrier free distance of 80 meters

Clutch distance: 15 mm

Working environment: temperature of -10 ℃ ~+40 ℃, relative humidity below 90% without dew

Wireless infrared detector

Power supply: DC9V (built-in 9V battery)

The quiescent current: ≤ 100 μ

The emission current: mA ≤ 20

Frequency: 315 MHz ± 0.5 MHz

Transmission distance: barrier free distance of 80 meters

Detection speed: 0.3~3 M / s.

Detection range: 5~10 M

Detection angle: 110 ° 60 ° level

Working environment: temperature of -10 ℃ ~+40 ℃, relative humidity below 90% without dew

Remote control

Power supply: DC12V (built-in 12V battery)

Static current: 0

The emission current: mA ≤ 15

Frequency: 315 MHz ± 0.5 MHz

Transmission distance: barrier free distance of 80 meters

Working environment: temperature of -10 ℃ ~+40 ℃, relative humidity below 90% without dew