Self luminous paint paint

1, good performance, luminous in the dark can be a long time (4-8 hours).

2, does not contain radioactive material, and can be used safely.

3, suitable for indoor wood products, metal products, plastic (polystyrene, ABS, hard vinyl chloride, acrylic), foamed polystyrene, paper.

1, completely remove the need to paint before use parts of oil, water and dust.

2, above and below must shake the tube about two minutes before painting, paint to mix evenly.

3, first in a small area on the test plate coating, determine the accuracy of the color you selected. About 15-30 cm from the object to be sprayed surface, are speed spray nozzle under pressure with your index finger back and forth.

4, the use of repeated spraying every 5 minutes, spray a thin layer, done better than the last. Left a small amount of paint cannot be sprayed out, please rotate the nozzle 180° spray.

5, such as a coating finish, store paint cans upside down before, pressing the nozzle about 3 seconds, clean the nozzle more than paint, prevent gag.

1, store away from children.

2, spraying aerosol cans must be maintained when upright and with the angle between the horizontal plane shall be not less than 45°, and construction at the air circulation.

3, if splashed into the eyes, immediately flush with water, and medical treatment; if accidentally swallowed induce vomiting and call the doctor immediately for treatment.

4, this product is flammable, in less than 40 ℃ storage, do not put it in the car, away from sources of heat and open flames, no exposure, puncture or incinerate can.

5, net weight and gross weight change over time, an aerosol product of normal.