1. implementation requirements:

customers from the date of product purchase, our service was kicked off. The device comes into play before the transition and the future upon new requirements to the huada company, through our mutual communication and consultation, site planning specific programmes or transition plan agreement signed. Huada company will according to the agreement, specific requirements to send technical personnel to the implementation.

2. the written material provided to the customer

in accordance with customer provided equipment to enter the scene plane size and the content of the plan, huada company within a short time to provide customers with a "three-dimensional maps, floor plans, equipment Foundation", and feedback to the customer by fax or mail, after it has been confirmed, according to the drawings.

3. site planning, construction, customer must provide help

a. to facilitate the sent to our technical staff, according to the time length required customers to arrange their accommodation or under the agreements for assistance to deal with.
b. provides site construction the regional construction of all material, and by needed of various tool, and measuring and instrument,
c. According to engineering specification requirements, provides construction by needed of workers Alice came

4. site planning Shi China up company of service content

a,. China up company of technicians arrived site Hou, according to both determine of drawings, for underlined, and positioning, is responsible for guide equipment based of making and the school flat work
b. Supervision and field technical personnel in accordance with the requirements of drawings for the construction
c. to provide equipment for raw materials in the production process of standards

5. site planning fees and settlement

according to the purchase contract and service manual and agreement between the two parties, there are fees for you to choose: is divided into two categories: see details.

1. apply huada crushers, feeders, equipment installation and commissioning work

2. installation and commissioning work is divided into installation guide installation and commissioning and contracting two

⑴ Installation Guide: huada company to send one or two technicians to the customer site to guide customer personnel to equipment installation and debugging.
b contracting installation: all installation and testing by huada company sent, follow the device installation debugging finished material for the results.

3. installation debugging customer needed provides of help

3.1 Guide installation:
non-China up company products of need you provides equipment of electrical principle figure and equipment plane layout figure, and help arrangements installation personnel of accommodation, and debugging by needed of technicians and the auxiliary workers and installation by needed of hanging with, and tool, and auxiliary material, guarantee water, and electric, and road tee; in construction among involved customer the sector requirements handle of by needed procedures and coordination peripheral Affairs,.
3.2 installation
in addition to the contracted customers with the appropriate device information, floor plans, guaranteed tee and construction workers, tools, procedures, but other huada company alone.

4. installation and commissioning standards

either way, huada company according to the standard of equipment installation, until the end of the normal production of finished material.

5. installation debugging charges standard and settlement approach (both agreement)

6. installation debugging China up company to customer provides of guarantee

I company selected has qualification of experience rich personnel to customer site installation debugging (in this company engaged in installation debugging work three years above); in site installation process in the on equipment exists of not reasonable place can active to customer provides processing programme and recommends; in installation debugging process in the we personnel comply with safety provides; To provide customers with detailed product manuals, electrical schematics, and related information. Solve equipment problems during the installation process.

1. refers to the production company to operate the equipment crusher, feeder, screening equipment. After the end of the installation the customer need we send on behalf of operation for various reasons.

2. customer to China on behalf of the company operation needs, we provide clients with the equipment model, after a comprehensive analysis of equipment operation agreement with the customer communication, other side of experienced personnel to the scene to conduct operations to ensure customer needs.

3. the operator according to the construction requirements of reasonable adjustment in accordance with the normal boot sequence on standard operation equipment; check the normality of the mechanical and electrical parts, equipment problems during the operation and routine maintenance of equipment and urged customers to know; fill operation records and making data measuring equipment on a regular basis.

1. timely maintenance and repair of the equipment determines the service life of the device, fully taking into account the customer's equipment according to customer requirements, the service life, after analysis of the various factors and customer consultation, necessary technology, personnel number, date and customer enter into a maintenance agreement.

2. our steps:
⑴ equipment on production before a thorough examination, and completes the record. Confirm the components normally used in production.
b the device during normal operation of equipment inspection tour, find the problem immediately, failure to take decisive measures against major.
c transmission parts in accordance with the maintenance of the equipment time for lubrication; safety and quality check of key site downtime, job records.
d with customer operations personnel to check irregularities occurred during the operation ruled out. Provide replacement parts to customers in a timely manner (badly worn);
⑸ equipment maintenance and record keeping. Finishing equipment spare parts list provided to customers;

3. fee: according to type of equipment monthly pricing.

1. service applicable to customers in China of equipment operation, maintenance, maintenance personnel on scene and the huada company equipment operation, maintenance, maintenance training.
2. By mutual agreement, signed an agreement according to the training content. Huada company is the eligible customer staff training within the company or to China, and specific elements:
⑴ equipment whole structure, working principle and job training.
b equipment parts of the level, run method, and connection mode.
c device setup testing methods, considerations, and installation requirements.
d the electrical principle, installation and commissioning of the equipment and cabling requirements. Device debugging methods in metrology and sensors in situ conservation considerations.
⑸ daily maintenance training, common faults and troubleshooting. Key components of the measurement (with no load, and load) standard, the common accessories replacement methods and points for attention.

1. Services relocation of equipment for China's transition, installation work.

2. implementation measures: according to customer requirements by mutual agreement, equipment models, moving distances, relocation form (full package, Contracting), and following the relocation of work signed an agreement.

3. content:

⑴ we develop equipment disassembly and Assembly programs. Development of loading programmes. Implementation of the new arrangement of the equipment (refer to site layout). Split
b in accordance with the programme to remove the equipment unloading unloading to ensure the integrity and security of equipment components. Safe, timely and accurate operation of control equipment to the new site.
c to install the equipment in normal order (as described in the installation and commissioning). After installation and customer handover. Throughout the process of transition to move the external issues dealt with by the customer.

4. fees: transition moving costs there are two parts for customer choice, full costs include cranes, transport fees and auxiliary material costs, personnel costs, hours, fees, management fees, and so on. Contractor's costs including staff accommodation and work.

1. China up to three packs of service only on huada company produced a variety of equipment, including the comprehensive repair of equipment, new technology enables the reconstruction of production equipment, before upgrade.

2. implementation measures: according to customer's request we will promptly implemented the application of new technologies to the customer upon the customer equipment required to repair and in accordance with the company's new technology specific implementation measures, forms, fees, dates, without affecting the normal client premise, the signing of the agreement implementation.

3. overhaul upgrades including:

⑴ inspection equipment parts are used.
b repair, and damaged parts. Details of providing replacement parts, and to guarantee supply.
c in the know-your-customer equipment design or manufacturing defects. To customers for the new technology.
d to upgrade the equipment of the control system.

4. the charging standards: according to the customer's desired item separately (accessories purchase fees excluded).